(OT) Brezeln!

  • Too hot here in the morning to go out for a Zweirad-ride X(


    So I decided to try to make Brezeln... 8o Never made before, it's a long time I wanted to make but I never found the right moment.


    [Blockierte Grafik: http://img212.imageshack.us/img212/576/brezelnlz6.th.jpg]


    Here they are (including 2 salt-free for my girlfriend :)). An error I made is that I shaped them too small, so at the end of baking they looked like Krapfen instead of Brezeln ;) , they taste great all the same. Next time I'll shape bigger.


    Gruessen :ber:


    Simone

  • Zitat

    Original von Muffler82
    An error I made is that I shaped them too small, so at the end of baking they looked like Krapfen instead of Brezeln ;) , they taste great all the same. Next time I'll shape bigger.


    No, thinner.

  • Zitat

    Original von Muffler82


    An error I made is that I shaped them too small, so at the end of baking they looked like Krapfen instead of Brezeln ;) , they taste great all the same. Next time I'll shape bigger.


    Hello Simone,
    A genuine Brezel looks in such a way:
    [Blockierte Grafik: http://blog.esska.de/wp-content/uploads/2007/12/brezel.jpg]
    Nevertheless, you have that well made and industriously further-practice!
    Gruß Pit.

  • Das sieht wie eine "schwäbische" aus, d.h. mit breitem und damit weichem Stück.
    Die bayrischen Brezeln sind glaub´ auf der langen Seite auch dünn (und evtl. nicht eingeschnitten), sodaß sie dort auch hart sind.

  • Zitat

    Die bayrischen Brezeln sind glaub´ auf der langen Seite auch dünn


    nö! aber sonst ist alles anders hier - schrippen heißen hier semmeln und die Menschen hier reden so, dass ich sie problemlos verstehen kann :tongue:


    mfg


    da Kine

    "Theorie der Gesellschaft. Laufzeit: 30 Jahre. Kosten: keine"

  • Zitat

    Das sieht wie eine "schwäbische" aus, d.h. mit breitem und damit weichem Stück


    oh ihr Banausen :tongue:


    so sieht halt eine Brezel aus .............. :O Ihr Nordlichter



    diese anderen Teile ganz oben auf dem Bild könnte man evtl. als missglücktes Laugenweckle bezeichnen ........... ;(



    Jack :476

    Zwei Dinge sind unendlich, das Universum und die menschliche Dummheit, aber bei dem Universum bin ich mir noch nicht ganz sicher.


    Albert Einstein.

  • Sven is right, the correct spelling in bavaria is "Brezn" or "Breze". But don't worry Muffler, well done, because around my place (northern bavaria) you would name what you've done still a "Brezn" or "Bretzn-Semmel".


    Hope it tasted as good as it looks!

  • Wow, the Brezeln-affair :D hehehe


    Thanks to everybody for replies. @ Hetzer: that's exactly how my Brezn looked like before baking... except for the colour. Oven heat and yeast have inflated them. :)
    Anyway I found them both thinner and thicker: the ones I bought in Südtirol where thinner, harder and about 10 cm in diameter; while the others I ate in last "SeptemberFest" were thicker, softer and about 20-25 cm in diameter. (Both were extraordinary!)


    Grüßen :ber:


    Simone

  • [Blockierte Grafik: http://blog.esska.de/wp-content/uploads/2007/12/brezel.jpg]


    As a Swabian this swabian one to me taste best.
    But it´s more difficult to make:
    The ends of the slings must be very, very thin!
    The thick one thicker and slit.


    So those very thin slings become very crispy.
    And when it´s ready you can cut the thick one and smear butter in.

  • Gaaanz einfach: So lange jemand von Brezel schreibt ist das niemals ein Altbayer (Altbayern = (ungefähr) Oberbayern, Teile von Niederbayern).


    Hier im echten Bayern gibts nur Brez'n. Genau "Punkt"!


    Tscharlie
    "Münchner von Beruf(ung)"

  • @ Muffler 82: My wife is from Munic and she's missing it very much (we life in Zurich). She loves those Brezels: could you post the recipe here? (seriously) -> I will bake them for her then...
    Thanks! (They do look too big, but beside that very nice, respect!) :bus:

  • Zitat

    Original von Motte
    @ Muffler 82: My wife is from Munic and she's missing it very much (we life in Zurich). She loves those Brezels: could you post the recipe here? (seriously) -> I will bake them for her then...
    Thanks! (They do look too big, but beside that very nice, respect!) :bus:


    Ooooops! Sorry for my late answering but I've been far from the Forum during last days! :(
    Here's the recipe I followed:


    - 500 g of wheat flour (not particularly fine: here in Italy we refer to it as a 0-type flour);
    - 250 ml of water;
    - 20 ml of oil (I've used maize oil; NOT olive oil because its strong flavour -expecially for the one we have here in Tuscany! :tongue:- could affect the final product's flavour);
    - a teaspoon of sugar;
    - a teaspoon of table (fine) salt;
    - some kitchen salt;
    - 10 g of brewer's yeast.


    VORSICHT! I've used a solution of caustic soda to create the Brezn's outer brown crust: somebody uses a solution of sodium bicarbonate, in different proportions, but the effects (colour and flavour) are not the same.
    On the other side, caustic soda is more dangerous to handle (it can cause severe burns!): so, be VERY CAREFUL during its use. (How could you operate the Dekohebel if your fingers are gone? ;))
    A solution of 30 g of caustic soda in 1 liter of cold water is OK to gain the result: put the cold water in a plastic bowl, and add caustic soda LITTLE BY LITTLE. Mix water with a ladle or spoon while adding, and keep on mixing until water is clear and transparent again. Notice that the bowl's temperature is increasing. (It should not reach dangerous temperatures anyway.) Put then the bowl apart until passage #3.


    Description:


    1) Work half of the flour with 2/3 of the water, the yeast and the sugar. When you'll reach a soft mixture, let it stand for (at least) an hour.


    2) Then, work the mixture with the other ingredients, except for the kitchen salt (it will be put on Brezeln before baking). Add the oil as the last one: it's only to make the mixture more elastic. Work it very well, no lumps have to remain there. After, let it stand another time for 15 minutes.


    3) Then, form the Brezeln: take a part of the mixture, lengthen it by rolling to reach a cylindrical strip and twist it... as a Brezel :).
    Take then the so formed Brezel and plunge it entirely in the caustic solution (one second is enough!), a ladle could greatly help during this operation. When taking the Brezel out of the solution, be careful to shake it enough to make it loose as more caustic solution as possible.


    4) Then, gently put the Brezel on the oven board (now, if you want, you can slit the upper side) and sprinkle with kitchen salt. I put a sheet of "greaseproof paper" (oven paper) on the oven board, to prevent the Brezeln from sticking.
    Repeat passages #3 and #4 for the other Brezeln, then put them in the oven at 200°C for 20 minutes, or until they reach their brown colour.


    Let me know how they taste! :)


    Grüßen :ber:


    Simone



  • Eating swabian brezel rulez!!!


    Nobby
    (from north germany, but I can eat too ;) )

    ---------------------------------------------------------------------------------------------------


    Better Motörhead than dead!

Letzte Aktivitäten

  • Nobby

    Hat eine Antwort im Thema ZÜNDUNG EIN Kontrollleuchte verfasst.
    Beitrag
    Vielleicht für dich off topic, aber so wie man bei Verlassen des Hauses den Schlüssel in der Haustür dreht (und anschl. mitnimmt), sollte man das beim Verlassen von Fahrzeugen auch machen und schon ist alles gut, ganz ohne Elektrobasteleien.

    Nobby
  • Schumi

    Hat eine Antwort im Thema ZÜNDUNG EIN Kontrollleuchte verfasst.
    Beitrag
    Hallo Hans,
    toll, also von der Wechselspannung an der Lichtmaschine gehe ich über den Gleichrichter an die Spule des Relais. Mit der Zündspannung dann an den Arbeitskontakt (Öffner) des Relais. Von dort an die Kontrolllampe und von der dann an Masse.
    Wenn…
  • Hiha

    Hat eine Antwort im Thema ZÜNDUNG EIN Kontrollleuchte verfasst.
    Beitrag
    Ich bin mir nicht sicher, aber ich glaub die SR400 und vielleicht auch ganz späte SR500 hatten Seitenständerschalter. Ich hab vor gut 40 Jahren mal für einen Spezi einen Seitenständerschalter mittel Magnet und Reedkontakt gebastelt, das war einfach…
  • Schumi

    Hat eine Antwort im Thema ZÜNDUNG EIN Kontrollleuchte verfasst.
    Beitrag
    Super, vielen Dank.
    Das mit dem Öldruckschalter find ich genial. Weiss jemand, ob es eine Einbaumöglichkeit am Motor dafür gibt?
    Schalter für Seitenständer wäre auch eine gute Lösung. Gab es das an der SR schon mal?
    Meine Hochachtung an die Puristen unter…
  • tecuberlin

    Hat eine Antwort im Thema ZÜNDUNG EIN Kontrollleuchte verfasst.
    Beitrag
    Und nicht vergessen den Killschalter wieder auf ON zu stellen.
  • Tscharlie

    Hat eine Antwort im Thema ZÜNDUNG EIN Kontrollleuchte verfasst.
    Beitrag
    Problem ist ja, die Leuchte muss so auffällig auch am Tag leuchten, dass man auch sieht, die Zündung ist noch an.
    Das macht aber dann in der Nacht richtig Ärger, wenn die eben beim Fahren leuchtet, da nutzt es auch nict webb das grün leuchtet.

    Aber: Der…
  • Hiha

    Hat eine Antwort im Thema Motorteile - Kuriositäten verfasst.
    Beitrag
    Ich tippe eher auf Härtefehler, oder Strahlsand aus der vergangenen Motorüberholung. Wie sieht der Hubzapfen aus? Wurde das Lager auch gewechselt, oder nur das Pleuel? Ists ein Originalpleuel oder eins aus dem Zubehör? Gibt die Hubzapfenposition auch…
  • Hiha

    Hat eine Antwort im Thema ZÜNDUNG EIN Kontrollleuchte verfasst.
    Beitrag
    Das mit der Spannungsdifferenz könnte man machen, solange eine Solche herrscht. Was aber nicht immer der Fall sein muss.
    Öldruck ist schon besser, wobei der Öldruckschalter einer sein muss, der bereits bei sehr niedrigen Drücken schaltet, so ab 0,1bar…
  • martin58

    Hat eine Antwort im Thema Verchromte Stahlfelge für 2J4 verfasst.
    Beitrag
    Vielen herzlichen Dank für die Gedanken zur Bremsscheibe und die Mutmaßungen zu den Sehfähigkeiten der Prüfingenieure.
    Das Bild meiner SR mit der Chromfelge soll einen optischen Eindruck von der Felge vermitteln. Ich möchte damit keinesfalls bei einem…
  • Hesi

    Hat eine Antwort im Thema ZÜNDUNG EIN Kontrollleuchte verfasst.
    Beitrag
    Es fehlt noch die Antwort: Also mein Moped hat überhaupt gar keine Lämpchen ;) --- Luxusprobleme halt

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!